Quality and properties
- Robust, stable machine, suitable for filling micro and small quantities
- All-important functions clear to see and easy to read
- Portable, removable piston, which fits the cylinder
- Compatible with CleanJector
- No power supply required
- Mobile and flexible
- Very simple operation
- Suitable for filling 400ml and 150ml cans
- Suitable for filling 1K and 2K coating qualities
- Suitable for water-and solvent-based coats
- Fast colour change
- Very good value for money
-
Description: Exterior: Case made of stainless high-grade steel with door, operation controls and control display, base plate and filling lever. Interior: Mobile lifting device with stop plate, cylinder as paint receptacle and intended holding device, mobile piston and adapter for filling
-
Measurements: 32 x 25 x 75 cm
-
Capacity: ca. 20 cans/ h (without colour change, depends on the viscosity of the paint)
-
Max. filling viscosity: 300 s/DIN 4 mm
-
Life: Long working life since there is almost no wear and tear
Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Before use, carefully read and observe the warning texts on the label!
- Easy filling process
- For detailed instructions, please refer to the attached manual
- For professional use only
- Wear appropriate protection goggles and gloves
If you use the intended base plate to bolt the VitoMat II firmly to the ground, working will be so much easier. The adjustable pedestals can be used to quickly stabilise the device.
Product safety information
Manufacturer information:
European Aerosols GmbH
Kurt-Vogelsang-Str. 6
Baden-Württemberg
Haßmersheim, Deutschland, 74855
info-de@european-aerosols.com
.jpg)
