Colormatic 9010 pure white silky gloss 400ml spray

SKU: 60 190 45 20
HAN: 190452
Category: Other Spray Cans
Manufacturers:

ColorMatic RAL acrylic spray paint is a premium, satin-finished acrylic coat with satin-finish - specially formulated for quick coating of industrial surfaces. Thanks to the broad-jet atomization, it can also be used on larger surfaces.

15,99 €

39,98 € per 1 l

incl. 19% VAT , plus

Available immediately
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Description
Question about item

Quality and properties

High-quality acrylic coat
Simple application
Professional jet atomization ensures that it can be used for larger surfaces
Extremely high pigmentation and specific additives provide high coverage
High film thickness with good hold
Light blending

Physical and chemical data

Basis of binder: Acrylic
Colour: Specific
Smell: solvent
Degree of gloss: (at measurement angle 60° acc. to DIN 67530)
glossy: 80 gloss units
satin glossy: 30 gloss units
matt: 10 gloss units
Efficiency:
Depending on consistence and colour of the ground:
400 ml are sufficient for approx. 0,8 - 1,0 m²
Substrate:
ColorMatic 2K Primer Filler no. 195 327
ColorMatic 1K Primer for Aluminium no. 190 278
ColorMatic 1K Primer for Zinc no. 190 285
ColorMatic 1K Epoxy Primer no. 174 414
ColorMatic 1K Filler, beige no. 856 556
ColorMatic 1K Filler, grey no. 874 987
Cured paint, polished
ColorMatic 1K Primer Filler:
HG 1 white no. 856 532
HG 2 light grey no. 882 425
HG 3 grey no. 856 525
HG 4 tele grey no. 644 719
HG 5 basalt grey no. 882 432
HG 6 graphite grey no. 882 449
HG 7 black no. 549 663
HG 8 red no. 856 549
Drying time (at 20°C, 50% relative air humidity):
Dust-dry: after approx. 10 Minuten
Dry to touch: after 30 minutes
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
Temperature resistance: to 90°C
Storage stability:
10 years if appropriabte storage provided (=10°-25°C, relative air humidity of max. 60%)
Size:
Aerosol cans, maximum nominal volume 400 ml
VOC-value: 238,1g

Environment and labelling

Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

Before use, carefully read and observe the warning texts on the label!

Clean surfaces to be painted thoroughly with ColorMatic silicone remover no. 174469, then sand
The area must be dry and free of dust and grease
Shake can well for 2 minutes
Carry out spray test
2-3 coats
For professional use only
Wear an appropriate respirator (recommended type A2/P3)