ColorMatic 1K clear coat is a UV-resistant, fast-drying clear coat that can be applied universally at all existing base coats (solvent-based). Available in glossy, satin gloss and mat quality. Because of its very good flow and ease of polish, 1K Clear Coat glossy is highly suitable for spot repairs with solvent-based paints.
Quality and Properties
- Fast drying time
- Easy application
- Can be used on all solvent-based paints
- UV resistant
- Ideal for all construction parts with a brilliant mat respectively satin gloss look
- Tip: we advice at Clear Coat mat to paint the construction parts complete
- Caution: don't polish!
Physical and Chemical Data
- Basis of binder: Acrylic resin
- Colour: transparent
- Smell: solvent
- Degree of gloss: at measurement angle 60° acc. DIN 67530
- mat: 15-20 GE
- Efficiency:
- Depending of consistence and colour of the substrate 400 ml are sufficient for approx. 1,5 - 2,0 m²
- Substrate:
- Basecoats uni or metallic
- Drying (at 20°C, 50% relative air humidity):
- Dust-dry: after 5 - 10 minutes
- Touch-dry: after 10 - 20 minutes
- Cured after 24 hours
- The drying time is depending on the ambient temperature, air humidity and the applied paint layer
- Temperature resistance:
- glossy to 110°C
- Storage stability:
- 10 years if appropriate storage provided
- Size:
- Aerosol cans, maximum nominal volume 400 ml
- VOC-Value:
- mat 253,9 g
Environment and Labelling
- Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
- Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
- Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Using Instructions
- Before use, carefully read and observe the warning texts on the label!
- Solvent-based paints can be recoated with ColorMatic 1 component clear coat once they have dried for 30 minutes
- Shake can for 2 minutes
- Carry out spray test
- 1K Clear Coat glossy: For spot repairs, cover the wet edges of the clear coat ColorMatic Spot Blender no. 114229
- Not suitable for recoating water-based paints (we recommend CM 2K Clear Coat high-gloss no. 187216, 190469)
- Don't spray on synthetic resin areas!
- For professional use only
- Use an adequate respirator mask (we recommend type A2/P3)
Product safety information
Manufacturer information:
European Aerosols GmbH
Kurt-Vogelsang-Str. 6
Baden-Württemberg
Haßmersheim, Deutschland, 74855
info-de@european-aerosols.com
| Item information |
Value |
| Content: |
0,40 l
|
