Colormatic pre-fill standard T/V 190ml

SKU: 60 738 07 40
HAN: 738074
Category: Prefilled Sprays
Manufacturers:

The ColorMatic pre-fill spray paint is prefilled with propellant and specific additives and then filled by VitoMat filling machines with the desired coat.

£ 8,60

£ 45,24 per 1 l

incl. 19% VAT , plus

Currently out of stock

Quality and properties

A spray can pre-filled with propellant and solvents. The paint is transferred via a filling device into the can to produce a ready-to-use end product (dealers liability)
Simple, time-saving application
Excellent atomisation
Light blending
Ideal for spot or refinishing parts

Physical and chemical data

Colour: depending on filling
Smell: solvent
Efficiency:
Depending on consistence and colour of the ground
Substrate:
Depending on the colour of the substrate apply Primer Filler HG1 - HG8, 2K Primer Filler no. 195 327, 1K Primer for ALU no. 190 278, 1K Primer for Zinc no. 190 285, 1K Epoxy Primer no. 174 414, 1K Filler, beige no. 856 556, ColorMatic 1K Filler, grey no. 874 987, cured paint sanded
Drying time (at 20°C, 50% relative air humidity):
The drying time depends on surrounding temperature, air humidity, thickness of the applied coat and the filled type of paint (refer to information of the paint manufacturer)
Storage stability: empty cans: 5 years
Filled cans: depending on type of paint from several hours up to 6 month (information from your specialist dealer). If appropriate storage provided (=10°-25°C, relative air humidity max. 60%)
Size:
Aerosol cans, maximum nominal volume 400 ml and 150 ml, filling quantity 100ml for no. 570704, filling quantity for 150ml can 37ml, no. M570707
VOC-value: 218g

Environment and labelling

Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

Before use, carefully read and observe the warning texts on the label!

Clean the surface to be painted thoroughly with ColorMatic silicone cleaner no. 174 469, then sand
Larger bare surfaces must be pre-primed with the appropriate ColorMatic primer
The area must be dry and free of dust and grease
Shake can vigorously for 2 minutes
Carry out spray test
Compatibility testing is necessary
For professional use only
Wear an appropriate respirator (recommended type A2/P3)