Colormatic pre-fill SB-1 T/V 102ml

SKU: 60 249 30 30
Category: Prefilled Sprays
Manufacturers:

The ColorMatic pre-fill spray paint is prefilled with propellant and specific additives and then filled by VitoMat filling machines with the desired coat.

£ 6,30

£ 61,77 per 1 l

incl. 19% VAT , plus (Standard)

Currently out of stock

Quality and properties

A spray can pre-filled with propellant and solvents. The paint is transferred via a filling device into the can to produce a ready-to-use end product (dealers liability)
Simple, time-saving application
Excellent atomisation
Light blending
Ideal for spot or refinishing parts

Physical and chemical data

Colour: depending on filling
Smell: solvent
Glanzgrad: matt. Base coats always have to be re-coated with 1K or 2K clear coat. After applying clear coat, the base coat has a very good resistance to chemicals and weathering and a durable gloss.
Efficiency:
Depending on consistence and colour of the ground
Substrate:
Depending on the colour of the substrate apply Primer Filler HG1 - HG8, 2K Primer Filler no. 195 327, 1K Primer for ALU no. 190 278, 1K Primer for Zinc no. 190 285, 1K Epoxy Primer no. 174 414, 1K Filler, beige no. 856 556, ColorMatic 1K Filler, grey no. 874 987, cured paint sanded
Drying time (at 20°C, 50% relative air humidity): 8 - 10 Min.
The drying time depends on urrounding temperature, air humidity and thickness of the applied coat.
Storage stability: empty cans: 5 years
Filled cans: 3 years
Size:
Aerosol cans, maximum nominal volume 400 ml and 150 ml, filling quantity 100 ml for no. 249297, filling quantity for 150 ml can 30 ml, no. 249303
VOC-value:
art.no. 249297: 216 g
art.no. 249303: 76 g

Environment and labelling

Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

Before use, carefully read and observe the warning texts on the label!

Application

Clean the surface to be painted thoroughly with ColorMatic silicone cleaner no. 174 469, then sand
Larger bare surfaces must be pre-primed with the appropriate ColorMatic primer
The area must be dry and free of dust and grease
Shake can vigorously for 2 minutes
Carry out spray test
Compatibility testing is necessary
For professional use only
Wear an appropriate respirator (recommended type A2/P3)

Content:	0,10 l

Contact data

First name - optional

Last name

Firm - optional

E-Mail

Phone - optional

Fax - optional

Question about item

Your question

Contact data

First name - optional

Last name - optional

E-Mail