Colormatic radiator RAL 9016 traffic white silky gloss 400ml spray

SKU: 60 270 68 00
Category: Other Spray Cans
Manufacturers:

ColorMatic radiator spray facilitates quick and simple coating of larger areas due to excellent flow, professional jet atomisation and high yield. High pigmentation and a fast drying time make it ideal for mobile use. It is heat resistant to 80° C.

9,16 €

incl. 19% VAT , plus (Standard)

Currently out of stock

Quality and properties

Fast and easy to use, ideal for mobile use
High-quality paint quality, temperature resistant to 80° C
High film thickness and spreading rate with good hold
Easy to use and quick drying time
Professional atomization ensures that it can be used for larger surfaces
Extremely high pigmentation provides high coverage
High-quality acrylic

Physical and chemical data

Basis of binder: Acrylic combination
Colour: specific
Smell: solvent
Efficiency:
Depending on consistence and colour of the ground:
400 ml are sufficient for approx. 0,8 - 1,0 m²
Substrate:
ColorMatic 2K Primer Filler no. 195 327, ColorMatic 1K Epoxy Primer no. 174 414, ColorMatic 1K Filler, grey no. 874 987, cured paints, polished
Drying time (at 20°C, 50% relative air humidity):
Dust-dry: after approx. 10 minutes
Dry to touch: after approx. 30 minutes
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
Temperature resistance: to 80°C
Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
Size:
Aerosol cans, maximum nominal volume 400 ml
VOC-value: 262,2 g

Environment and labelling

Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

Before use, carefully read and observe the warning texts on the label!

Cover surfaces not to be coated and cover the surrounding area
Remove rust and old paint from the surface to be painted, then sand and prime if necessary
The area must be dry and free of dust and grease
Shake can well for 3 minutes
Carry out spray test
Apply several thin coats at two-minutes intervals
Don't use on warm surfaces. Radiators must be cool!

Content:	0,40 l

Contact data

First name - optional

Last name

Firm - optional

E-Mail

Phone - optional

Fax - optional

Question about item

Your question

Contact data

First name - optional

Last name - optional

E-Mail